Start Batten 1500 4000/7000lm MWC 830/840
Start Batten Microwave Corridor
Product features
- LED batten, T8 replacement, ease of installation through 2 part push-in design of the housing, Traffic white (RAL9016) iron housing, 3900 - 7300lm (selected by DIP switches), 28 - 52W, 135-146lm/W, Integrated switch allows to choose between warm white (3000K) and neutral white (4000K) colour temperatures, CRI80, 3 step MacAdam ellipse, symmetric wide beam angle, Class I, 100000 hrs L70B50 lifespan, Non-dimmable driver with corridor function with microwave presence sensor, IK08, IP20, 1500 x 64 x 65mm (LxWxH) dimensions, 1.58kg weight. BESA compatibility. End cap incorporates 20mm conduit knock out.
Product overview
Product overview | |
---|---|
Product name | Start Batten 1500 4000/7000lm MWC 830/840 |
Technology | LED |
Cap/Base | N/A |
Housing | Steel |
General application | Logistics & Industry |
ETIM Class | EC000109 |
E-number FI | 4279495 |
Fixture luminous flux (lm) | 7300 |
Luminaire efficacy (lm/W) | 140 |
Light colour | Warm White or Neutral White |
CRI (Ra) | 80 |
Colour Variation Initial (SDCM) | SDCM3 |
Beam Angle (°) | 145x110 |
Photobiological Risk Group | RG1 |
Total power consumption (W) | 52 |
Electrical protection | Class I |
Control gear type | LED driver constant current |
Dimmable | No |
Dimming method | N/A |
LED Flickering Rate | Ultra low (5% or less) |
Housing colour | RAL 9016 - Traffic white / Bezel |
IP rating | IP20 |
IK rating | IK08 |
Product EAN number | 5410288489827 |
Warranty | 5 years |
Product Data
General data | |
---|---|
Product name | Start Batten 1500 4000/7000lm MWC 830/840 |
Technology | LED |
Cap/Base | N/A |
Housing | Steel |
General application | Logistics & Industry |
Operating temperature range (°C) | -20°C...+40°C |
Performance ambient temperature Tq (°C) | 25 |
ETIM Class | EC000109 |
E-number FI | 4279495 |
Warranty | 5 years |
Optical data | |
---|---|
Fixture luminous flux (lm) | 7300 |
Luminaire efficacy (lm/W) | 140 |
Light colour | Warm White or Neutral White |
CRI (Ra) | 80 |
Colour Variation Initial (SDCM) | SDCM3 |
Beam Angle (°) | 145x110 |
Photobiological Risk Group | RG1 |
Electrical data | |
---|---|
Total power consumption (W) | 52 |
Primary Supply/Product voltage - min (V) | 220.0 |
Primary Supply/Product voltage - max (V) | 240.0 |
Lamp power factor | 0.9 |
THD (at 230 V, 50 Hz, full load, at 100% dimming level) ≤ xx.x % | 20 |
Electrical protection | Class I |
Control gear required | Yes |
Control gear type | LED driver constant current |
No. Of switching cycles before premature failures | >50000 |
Dimmable | No |
Dimming method | N/A |
Drive current (mA) | 350 |
Inrush Current (A) | 14.6 |
Inrush Duration (µs) | 280 |
Glow Wire Test (°C) | 650 |
Energy Efficiency Class (A->G) of contained light source | C |
Nominal Frequency (Hz) | 50/60Hz |
LED Flickering Rate | Ultra low (5% or less) |
Max. products per 10A C Breaker | 15 |
Max. products per 13A C Breaker | 18 |
Max. products per 16A C Breaker | 24 |
Max. products per 20A C Breaker | 30 |
Max. products per 10A B Breaker | 12 |
Max. products per 13A B Breaker | 13 |
Max. products per 16A B Breaker | 15 |
Max. products per 20A B Breaker | 18 |
Connectable conductor cross section - Max (mm²) | 1.5 |
Lifetime data | |
---|---|
Lifespan L70 B50 | 100000 |
Lifespan L80 B50 | 62000 |
Physical data | |
---|---|
Housing colour | RAL 9016 - Traffic white / Bezel |
IP rating | IP20 |
IK rating | IK08 |
Diffuser finish | Opal |
Diffuser material | PC Polycarbonate |
Nominal Product Length (mm) | 1500 |
Nominal Product Width (mm) | 64 |
Nominal Product Height (mm) | 65 |
Weight (kg) | 1.556 |
Packaging | |
---|---|
Product EAN number | 5410288489827 |
Packaging single length / height (cm) | 151.1 |
Packaging single width (cm) | 6.7 |
Packaging single depth (cm) | 6.7 |
DUN14 (inner) | 15410288489824 |
Units per outer package | 6 |
Packaging outer length / height (cm) | 152.5 |
Packaging outer width (cm) | 15.3 |
Packaging outer depth (cm) | 22.3 |
Safety data | |
---|---|
Optimal operating condition (°C) | -20-40 |